Christoph Emsenhuber
1578de50c3
- RB5009 final gestrichen (User-Entscheid 2026-07-22) — Router bleibt ap1/ap2, Referenzen in teilprojekte.md + hw-refresh-requirements.md bereinigt. - TP16.1 Ziel-Device von ap1 auf CRS326 Core-Switch retargeted (Doku-only, Scharfschalten bleibt gated bis TP21 den CRS326 abdeckt), Runbook umbenannt auf tp16.1-warp-mesh-native-crs326.md, cf-tunnel-mapping.md §14 + Handoff- Prompt mitgezogen. - TP21: docs/nas-vlan20/nautobot-image/ neu — der Dockerfile/nautobot_config.py/ allnet_sg8316m_driver.py, aus denen das laufende Custom-Image tatsächlich gebaut ist (der bisherige Verweis auf scratch/nautobot-gc-build existierte nirgends). Ergänzt napalm-ros + nornir-napalm + librouteros + gepinntes setuptools<81 (pkg_resources-Regression), Nornir-Credentials auf CredentialsNautobotSecrets umgestellt, Compliance/Intended-Config/SoT-Agg aktiviert. Backup/Intended/Compliance-Pipeline live gegen ap1 verifiziert. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
90 lines
3.5 KiB
Python
90 lines
3.5 KiB
Python
"""Custom Netmiko driver for the ALL-SG8316M (sw1) -- Telnet-only, IOS-like but
|
|
non-standard CLI (no `terminal length`, `--More--` paging, `end` from
|
|
config-vlan skips straight to the top level). No stock Netmiko/NAPALM driver
|
|
matches this device.
|
|
|
|
NOT YET WIRED IN: this module is imported nowhere yet. The `claudecode`
|
|
Telnet account on sw1 is currently rejected ("Incorrect User Name!!", found
|
|
2026-07-16) so this driver is unverified against the real device. Once
|
|
working credentials exist, activate it from nautobot_config.py:
|
|
|
|
import importlib
|
|
import allnet_sg8316m_driver # noqa: F401 (registers itself on import)
|
|
|
|
and add to PLUGINS_CONFIG["nautobot_plugin_nornir"]["dispatcher_mapping"]:
|
|
|
|
"allnet_sg8316m": "allnet_sg8316m_driver.GoldenConfigAllnetSg8316m"
|
|
|
|
(dispatcher class still needs writing once the connection class below is
|
|
confirmed to log in cleanly -- see project_nautobot_allnet_cudy_scope_20260716
|
|
memory for the full status and the two netmiko gotchas that cost the most
|
|
time: device_type must contain the literal substring "_telnet" for Netmiko to
|
|
pick the Telnet transport at all (BaseConnection.__init__ checks this by
|
|
string, not by class hierarchy), and `netmiko.ssh_dispatcher` at package level
|
|
is the dispatcher *function*, not the submodule -- reach CLASS_MAPPER via
|
|
`importlib.import_module("netmiko.ssh_dispatcher")`.
|
|
"""
|
|
|
|
import importlib
|
|
import time
|
|
|
|
from netmiko.cisco_base_connection import CiscoBaseConnection
|
|
|
|
_nm_dispatch = importlib.import_module("netmiko.ssh_dispatcher")
|
|
|
|
|
|
class AllnetSg8316mTelnet(CiscoBaseConnection):
|
|
def session_preparation(self):
|
|
self._test_channel_read(pattern=r"[>#]")
|
|
self.set_base_prompt()
|
|
self.ansi_escape_codes = True
|
|
|
|
def disable_paging(self, *args, **kwargs):
|
|
# No config knob for this on this firmware; paging is handled
|
|
# per-command in send_command_paged() below instead.
|
|
return ""
|
|
|
|
def telnet_login(
|
|
self,
|
|
pri_prompt_terminator=r"#\s*$",
|
|
alt_prompt_terminator=r">\s*$",
|
|
username_pattern=r"Username",
|
|
pwd_pattern=r"Password",
|
|
delay_factor=1,
|
|
max_loops=20,
|
|
):
|
|
return super().telnet_login(
|
|
pri_prompt_terminator=pri_prompt_terminator,
|
|
alt_prompt_terminator=alt_prompt_terminator,
|
|
username_pattern=username_pattern,
|
|
pwd_pattern=pwd_pattern,
|
|
delay_factor=delay_factor,
|
|
max_loops=max_loops,
|
|
)
|
|
|
|
def send_command_paged(self, command_string, max_pages=200, delay=0.3):
|
|
"""sg8316m paginates with '--More--' and has no length-0 setting;
|
|
page through by sending a space each time it appears."""
|
|
self.write_channel(command_string + self.RETURN)
|
|
time.sleep(delay)
|
|
output = ""
|
|
for _ in range(max_pages):
|
|
chunk = self.read_channel()
|
|
output += chunk
|
|
if "--More--" in chunk:
|
|
self.write_channel(" ")
|
|
time.sleep(delay)
|
|
continue
|
|
if any(p in chunk for p in ["sw1#", "sw1>"]) and "--More--" not in chunk:
|
|
break
|
|
if chunk == "":
|
|
time.sleep(delay)
|
|
return output.replace("--More--", "")
|
|
|
|
|
|
# Registered under the "_telnet" suffix required by Netmiko's own transport
|
|
# selection (see module docstring) -- registration is safe/inert on its own,
|
|
# nothing calls ConnectHandler(device_type="allnet_sg8316m_telnet") yet.
|
|
_nm_dispatch.CLASS_MAPPER["allnet_sg8316m_telnet"] = AllnetSg8316mTelnet
|
|
_nm_dispatch.platforms = list(_nm_dispatch.CLASS_MAPPER.keys())
|